Personal protective equipment (PPE) used to prevent falls or to suspend workers safely after a fall. Safety Belt Webbing can be divided into the following 3 categories according to the different use conditions:
1. Encircling pole operation Safety Belt Webbing supplier
A safety belt that binds the human body near the fixed structure by a rope or strap around the fixed structure so that the operator's hands can perform other operations.
A safety belt used to restrict the movement of an operator to the area where a fall may occur.
3. Fall to suspend seatbelt
The safety belt to suspend the operator when the operator falls when working at a height or climbing.
The safety belt is made of high strength polyester ribbon or higher strength fiber. Safety belt and rope must be made of nylon, vinylon and silk material. Electrical rod can be cattle leather belt. Common carbon steel or aluminum alloy steel for metal fittings. The rope is covered in leather, vinylon or rubber.
Aerial safety belt
Foundry crane is the main lifting equipment, metallurgical steel to lifting up to more than one thousand degrees Celsius of molten metal, maintenance and repair, because the crane in operation process, high temperature 50 degrees, and the surrounding dust, noise is very large, detection workers need board via the elevator up to 50 meters of small lifting platform, open testing equipment kit, According to the testing requirements, the main parts are inspected and maintained. A set of procedures lasts for more than two hours, which not only consumes physical energy, but also needs to endure the suffering of high temperature.
After the inspection personnel wear the safety belt for working at height, it can not only play a very good protective role for themselves, but also facilitate the smooth progress of the inspection work.
The safety belt is particularly important in the work at height, and the correct use of safety belt is a necessary prerequisite to ensure the safety of work. So, how to use the safety belt at altitude correctly?
Standard for proper use of safety belt at height:
1. To tighten the belt, the buckle assembly must be securely fastened.
2. When using the safety belt to hang, the hook should not be directly hooked on the safety belt rope, but should be hooked on the hanging ring of the safety belt rope.
3. Do not hang the safety belt on any member with weak or sharp corners.
4. When using the same type of safety belt, each part should not be replaced without authorization.
5. A severely impacted seat belt may not be used even if its shape remains unchanged.
6. Do not use safety belts to transfer heavy objects.
7. The seat belt should be hung securely above and not lower than the waist. Safety Belt Webbing manufacturer
Post time: Jun-07-2022